Product Details: Terminals Three

This means that the plates of the Extra Heavy Duty Capacitor are of very small thickness that in the case of a transient, over voltage produces a dielectric breakdown, the current circulating through the breakdown point will vaporize the metallic plate around this breakdown point, allowing the capacitor to continue working normally. Self healing process is extremely fast & requires only a few microseconds. Internal fuse over pressure system( patented system): In certain markets, there are standards and specifications asking for an individual protection for each capacitor elements. This additional protection is also incorporated to AB lifasa capacitors. Its principle of function is as follows:
 

EG standards establish maximum limits of overload, on temperature, voltage and current among which a power capacitor can work.
If these limits are exceeded in a permanent way, self healing mechanism is not able to act effectively and the overloaded capacitor can fail definitely.
Unlike those capacitors with a metallic plate, self-healing capacitors present a fault impedance that can have very different values.
These impedance values produce fault currents that can vary between the order of the rated current and several hundred times of itself (see enclosed graphic).
To avoid this type of failure, lifasa power capacitors are provided with a double protection system in each element: Internal fuse and Overpressure system.

Integral Safety in AB Lifasa Capacitor: Safety requirements have been taken into account in all matters related to the design of AB Lifasa capacitors. They form and integral part of them and cover all potential risks described in the standards of the international electro technical commission. There are four levels of protections provided in AB Lifasa capacitor.
 

Self Healing Properties

MOQ 50 Kvar

Additional Information:

Item Code: FME-Series

Product Details:

Application Power

We are specialized firm manufacturing and supplying wide range of Normal Duty Capacitors. It is a general purpose capacitors which is best suited for individual compensation of smaller loads. Featuring insulation levels of 3kV rms/ 15 kV peak, the offered capacitors are available in single or three phase design with the dry type impregnation at the best price in the industry.

Applications of Normal Duty Capacitors :
 

Especially suitable for the individual compensation of motors and other small loads.
Suitable the construction of small size automatic capacitor banks.

Advantage of Normal Duty Capacitors :

Capacitors are dry type and consequently ecological safe: there are no possibilities of impregnating liquid leakage.
Losses are specially reduced: lower than 0.05% (< 0.5 kVAR).
Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient over- voltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
Their weight and volume are very low, allowing them to be installed every-where without problem.

MOQ 5kvar

Product Details:

Capacitance as per kvar
Voltage Rating 380 to 800 volt
Power 5 kvar to 50 kvar units
Capacitor Size as per customer requrements

we are offering our clients a wide gamut of MPP/LT Shunt Capacitors. Our offered range of PFC capacitor is exactly designed under the observation of our specialist by utilizing optimum grade unfinished material and advance technology.

Features:
Perfect strength
Longer service life
High material strength

MOQ 5 kvar

Product Details:

Dielectric Material Polypropylene
Application power factor improvement

IS- 13585/1994

Range 
5 to 50 KVAR for all type of 
application - 415/440/525/690/800 Volts, 
50 Hz, 3Ph.

Features

All Polypropylene (APP) Film + Foil design
Non-PCB PXE oil
Highest inrush current with standing capacity
Suitable for harmonic loads
Extra low lossess
Banking upto 250 KVAR is possible

Application 

 
Fixed & Automatic P. F. Correction, Tunned & Detuned Filters, Outdoor use, 
It is strongly recommended to use at extreme high temperature environment such as in foundries, steel industries

Product Details:

Application Air conditioner/Motor, Audio, Power
Capacitance 41.1mfd to 410mfd
Power 5-50Kvar
Voltage Rating 415-800v

This means that the plates of the Super Heavy Duty Capacitor are of very small thickness that in the case of a transient, over voltage produces a dielectric breakdown, the current circulating through the breakdown point will vaporize the metallic plate around this breakdown point, allowing the capacitor to continue working normally. Self healing process is extremely fast & requires only a few microseconds. Internal fuse over pressure system( patented system): In certain markets, there are standards and specifications asking for an individual protection for each capacitor elements. This additional protection is also incorporated to AB lifasa capacitors. Its principle of function is as follows:

EG standards establish maximum limits of overload, on temperature, voltage and current among which a power capacitor can work.
If these limits are exceeded in a permanent way, self healing mechanism is not able to act effectively and the overloaded capacitor can fail definitely.
Unlike those capacitors with a metallic plate, self-healing capacitors present a fault impedance that can have very different values.
These impedance values produce fault currents that can vary between the order of the rated current and several hundred times of itself (see enclosed graphic).
To avoid this type of failure, lifasa power capacitors are provided with a double protection system in each element: Internal fuse and Overpressure system.

Integral Safety in AB Lifasa Capacitor: Safety requirements have been taken into account in all matters related to the design of AB Lifasa capacitors. They form and integral part of them and cover all potential risks described in the standards of the international electro technical commission. There are four levels of protections provided in AB Lifasa capacitor.

Self Healing Properties

MOQ 10 KVA

Product Details:

Capacitor Type ALL Poly Propylene
Application POWER FACTOR IMPROVEMENT
Voltage Rating upto 1000V

IS- 13585/1994

Range 
5 to 50 KVAR for all type of 
application - 415/440/525/690/800 Volts, 
50 Hz, 3Ph.

Features

All Polypropylene (APP) Film + Foil design
Non-PCB PXE oil
Highest inrush current with standing capacity
Suitable for harmonic loads
Extra low lossess
Banking upto 250 KVAR is possible

Application 

 
Fixed & Automatic P. F. Correction, Tunned & Detuned Filters, Outdoor use, 
It is strongly recommended to use at extreme high temperature environment such as in foundries, steel industries

MOQ 10 kvar

Product Details:

Capacitance 12kvar -400kvar
Voltage Rating 1.05kv -12kv
Phase Three Phase, Single Phase
Terminals Three, Six

Power Factor Correction Capacitor and electronic means of Power Factor Correction provide well-known benefits to electric power systems. These benefits include power factor correction, poor power factor penalty utility bill reductions, voltage support, release of system capacity, and reduced system losses.
A high power factor signals maximum use of electrical power, while a low power factor leads to purchasing more power to obtain the same load kW, which you pay for in various ways on your utility bill. AB POWER offers a free power factor site evaluation to help safely reduce energy consumption.

MOQ 10 KVA

Product Details:

Application Air conditioner/Motor, Power
Capacitance 41.1mfd to 410mfd
Power 5-50Kvar
Voltage Rating 415-800v

We are the leading supplier of Polypropylene Capacitors. Polypropylene is often abbreviated to PP, and indeed the polypropylene capacitors may be referred to as PP capacitors.The material has many several advantages and as a result it is widely used in many applications.

Features:

Longer service life
High material strength
Highly reliable

MOQ 5 kvar

Product Details:

Application Power
Capacitor Type Super Capacitor

Product Details:

Application Power
Capacitor Type MPP Cylindrical type
Voltage Rating upto 1000V

Self-healing Process in Metallized Capacitors
Even the best plastic films, like ceramic materials, are not free from pin-holes.
However, in the case of metallized film capacitors it is possible to eliminate these faults by applying a much higher voltage than the rated voltage. This process is known as self-healing and practically makes a "zero defect dielectric" possible.
The self-healing process is started by an electric breakdown, which takes about 10-8 secs. In the breakdown channel, the dielectric is transformed into a highly compressed plasma which is pushed out of the channel and presses the dielectric layers apart .
The flawless course of the self-healing process depends on the thickness of the metallization, on the chemical composition and on the rate of the applied voltage; here, apart from the chemical composition, the production conditions have to provide the prerequisites for optimum self-healing.

Product Details:

Brand ab lifasa & ab power make
Terminals Three, Six
Voltage Rating 230 to 900Volt

Manufacturer & Exporter of LT Capacitor. Our product range also comprises of Normal Duty , Heavy Duty Capacitor, Extra Heavy Duty Capacitor & Reinforced Capacitor. 

Other Details:
 

Capacitors are dry type and consequently ecological safe: there are no possibilities of impregnating liquid leakage.
Losses are specially reduced: lower than 0.05% (< 0.5 kVAR).
Capacitors are a self-healing type: in case of a dielectric breakdown, due for example, to a transient over- voltage, the self-healing mechanism vaporizes the metallic electrode around the breakdown point, allowing the capacitor to go on working normally.
Their weight and volume are very low, allowing them to be installed every-where without problem.

MOQ 10 kvar

Product Details:

Application Power
Capacitor Type Super Capacitor
Voltage Rating 415-800v

This means that the plates of the 3PH Capacitor are of very small thickness that in the case of a transient, over voltage produces a dielectric breakdown, the current circulating through the breakdown point will vaporize the metallic plate around this breakdown point, allowing the capacitor to continue working normally. Self healing process is extremely fast & requires only a few microseconds. Internal fuse over pressure system( patented system): In certain markets, there are standards and specifications asking for an individual protection for each capacitor elements. This additional protection is also incorporated to AB lifasa capacitors. Its principle of function is as follows:
 

EG standards establish maximum limits of overload, on temperature, voltage and current among which a power capacitor can work.
If these limits are exceeded in a permanent way, self healing mechanism is not able to act effectively and the overloaded capacitor can fail definitely.
Unlike those capacitors with a metallic plate, self-healing capacitors present a fault impedance that can have very different values.
These impedance values produce fault currents that can vary between the order of the rated current and several hundred times of itself (see enclosed graphic).
To avoid this type of failure, lifasa power capacitors are provided with a double protection system in each element: Internal fuse and Overpressure system.

Integral Safety in AB Lifasa Capacitor: Safety requirements have been taken into account in all matters related to the design of AB Lifasa capacitors. They form and integral part of them and cover all potential risks described in the standards of the international electro technical commission. There are four levels of protections provided in AB Lifasa capacitor.
 

Self Healing Properties